Vero layout for the WIIO. This is more or less identical to the RAH in topology with only a few component values changed and a
Category: Gain
I made this one with an on-board pot in mind (an Alpha 90 degree PCB pot will fit nicely on the trace side of the
Traced this one a while ago. Here’s a vero layout to go with it. It’s basically a Tube Screamer with a few minor changes. Update
Two more layouts today. These are for the AC- and RC-Boosters. They’re quite similar, but do note that there are a few differences, both in
Here’s a DIY circuit from mictester over at FSB. It’s a basic overdrive with a good amount of added sag/compression as you turn up the
This looks very similar to the BSiaB2, so I’m guessing it’s supposed to sound like a Marshall. Enjoy. Update (31.01.2013): Revision 1; fixed a mistake
Been a while now so I decided to do an easy one, more or less randomly chosen. Here’s a vero layout for the Blackstone Mosfet
This one was requested a long time ago. Here’s an overdrive pedal that uses an actual preamp tube, which is quite exciting. Based on Bajaman’s
I happened upon a thread about this effect on FSB and for some reason found it intriguing. This layout incorporates a few improvements suggested by
Three boosts in one box. You choose which one to use by means of a rotary switch. Looks like it’s the AMZ Mosfet Boost, the